DOT number requirements at a glance
Federal FMCSA rules apply to commercial carriers in every state, including Georgia. Your USDOT number must be:
- Displayed on both sides of the power unit
- In a color that contrasts sharply with the vehicle
- Readable from 50 feet in daylight — no federal letter height is set; we cut 2″ as the safe floor
- Shown as “USDOT 1234567” — the letters “USDOT” before your number
These are the federal baseline standards. Georgia intrastate carriers may have additional state requirements — tell us your state at checkout and we'll match them, or verify current rules with your state DOT/DMV.
Georgia’s own rules — verified against state law
✓ Checked against Georgia statutes and regulations · last verified 2026-07-24
- Georgia mirrors the federal threshold for trucks that never leave the state — over 10,000 lbs GVWR and the markings are required — and adds its own twist: Georgia-only carriers display the number with 'GA' after it, like 'USDOT 1234567 GA'. Also triggered by 9+ passengers for pay, 16+ passengers regardless, or placard-level hazmat. Name + number, both sides, readable from 50 feet.
- Legal name or single registered trade name, both sides, matching your MCS-150 — same triggers as the number.
- Georgia-only carriers also need the annual GIMC (Georgia Intrastate Motor Carrier) registration with DPS — opens October 1, deadline December 31 each year (gamccd.net/UCR). It's paperwork, not a decal, and first-timers must complete a certified safety seminar.
Not sure which of these hits your truck? Run the free 60‑second compliance check — answer a few questions and it builds your exact decal list, numbers filled in.
Get compliant — shop USDOT decals →
Rules can change — the authority on current requirements is your state agency (Georgia DPS — Motor Carrier Compliance Division).
What we cut for Georgia carriers
USDOT Number Decals
Your USDOT number cut to FMCSA spec — set of 2, both sides.
$16+MC Number Decals
Motor Carrier (MC) number lettering for interstate carriers.
$16+GVW / GVWR Decals
Gross weight-rating decals for trucks, trailers & dumps.
$16+Full Compliance Kit
Company name + USDOT + MC + GVW, all cut to match.
$54.95+Truck Door Lettering
Business name & fleet unit numbers — pro look, no wrap.
$18.95+Serving trucking across Georgia
We ship to owner-operators, contractors, and fleets throughout Georgia — including Atlanta, Savannah and Augusta — with a 1–2 business day turnaround. Every decal is cut on commercial-grade outdoor vinyl rated for 5+ years, weeded, taped, and ready to peel and stick.
What Georgia actually requires
Most decal sites quote the federal number and stop there. This is Georgia's own intrastate rule, read from the primary source and dated — the same data behind our free compliance checker.
| Trucks that never leave Georgia | Markings required at 10,001 lbs or more |
|---|---|
| What goes on the door | USDOT 1234567 GA + your legal or trade name |
| Letter height | Legally must be readable from 50 feet in daylight; we cut 2″ as the safe floor |
| Also triggered by | placard-level hazmat at any weight · 9+ passenger seating |
| Required on | both sides of the power unit |
Georgia mirrors the federal threshold for trucks that never leave the state — over 10,000 lbs GVWR and the markings are required — and adds its own twist: Georgia-only carriers display the number with 'GA' after it, like 'USDOT 1234567 GA'. Also triggered by 9+ passengers for pay, 16+ passengers regardless, or placard-level hazmat. Name + number, both sides, readable from 50 feet.
Also worth knowing:
- Gimc Registration — Georgia-only carriers also need the annual GIMC (Georgia Intrastate Motor Carrier) registration with DPS — opens October 1, deadline December 31 each year (gamccd.net/UCR). It's paperwork, not a decal, and first-timers must complete a certified safety seminar.
Source: GA DPS Fact Sheet #29 'USDOT # Requirements for Georgia Intrastate Commercial Motor Carriers' · verified 2026-07-24 · general information, not legal advice — confirm with Georgia DPS — Motor Carrier Compliance Division (404) 624-7211.
Check my truck free →Georgia DOT decal FAQ
Do I need a USDOT number in Georgia?
If you operate a commercial vehicle over 10,001 lbs, haul hazardous materials, or carry passengers for hire, federal law requires a USDOT number displayed on both sides of the vehicle — and many Georgia intrastate carriers need one too. We cut yours exactly as it should read.
What size do USDOT decals have to be?
FMCSA’s actual standard is legibility — readable from 50 feet in daylight, in a color that contrasts sharply with your truck, with “USDOT” shown before the number. Two-inch letters are the industry floor that reliably clears that bar, and some states set their own minimum on top of the federal rule. We cut 2″ by default and also cut 3″ and 4″ for larger trucks.
How fast can you ship decals to Georgia?
We make every order in 1–2 business days and ship nationwide, so most Georgia carriers have their decals in hand within a few days. Everything arrives weeded, taped, and ready to apply.
Can you match Georgia's requirements?
Yes. Tell us your state and vehicle at checkout and we cut to your Georgia intrastate spec. Not sure what you need? Message us — 20 years in vehicle graphics means we'll get it right.
Not sure exactly what Georgia requires?
Answer 7 quick questions and get the exact decal list for your truck — federal and Georgia rules checked against the actual regulations, sources cited, sizes included.
Run the free compliance check →Ready to get your Georgia trucks compliant?
Cut to spec, shipped fast, and backed by our guarantee: cut right or we remake it free.
Shop all decals →