DOT number requirements at a glance
Federal FMCSA rules apply to commercial carriers in every state, including Florida. Your USDOT number must be:
- Displayed on both sides of the power unit
- In a color that contrasts sharply with the vehicle
- Readable from 50 feet in daylight — no federal letter height is set; we cut 2″ as the safe floor
- Shown as “USDOT 1234567” — the letters “USDOT” before your number
These are the federal baseline standards. Florida intrastate carriers may have additional state requirements — tell us your state at checkout and we'll match them, or verify current rules with your state DOT/DMV.
Florida’s own rules — verified against state law
✓ Checked against Florida statutes and regulations · last verified 2026-07-24
- Florida trucks that never leave the state need federal-style markings (name + USDOT number) at 26,001 lbs or more — counting GVWR, combined rating, OR actual weight, whichever crosses first. Under 26,001 and no placarded hazmat: exempt. Displaying a false or fraudulent identification number is a first-degree misdemeanor in Florida (316.302(12)).
- Same trigger as the USDOT number: legal name or registered trade name, both sides, matching your MCS-150.
- Hauling placard-level hazmat in Florida? The 26,001-lb exemption doesn't apply — name and USDOT number are required at any weight.
- Florida farm trucks running under the agricultural exemption aren't off the hook: at 26,001+ lbs (or 3+ axles at any weight) the truck must display the owner's name AND home town, readable from 50 feet — a Florida-specific 'name + city' decal set.
Not sure which of these hits your truck? Run the free 60‑second compliance check — answer a few questions and it builds your exact decal list, numbers filled in.
Get compliant — shop USDOT decals →
Rules can change — the authority on current requirements is your state agency (Florida Highway Safety and Motor Vehicles — Commercial Vehicle Enforcement).
What we cut for Florida carriers
USDOT Number Decals
Your USDOT number cut to FMCSA spec — set of 2, both sides.
$16+MC Number Decals
Motor Carrier (MC) number lettering for interstate carriers.
$16+GVW / GVWR Decals
Gross weight-rating decals for trucks, trailers & dumps.
$16+Full Compliance Kit
Company name + USDOT + MC + GVW, all cut to match.
$54.95+Truck Door Lettering
Business name & fleet unit numbers — pro look, no wrap.
$18.95+Serving trucking across Florida
We ship to owner-operators, contractors, and fleets throughout Florida — including Miami, Jacksonville, Orlando and Tampa — with a 1–2 business day turnaround. Every decal is cut on commercial-grade outdoor vinyl rated for 5+ years, weeded, taped, and ready to peel and stick.
What Florida actually requires
Most decal sites quote the federal number and stop there. This is Florida's own intrastate rule, read from the primary source and dated — the same data behind our free compliance checker.
| Trucks that never leave Florida | Markings required at 26,001 lbs or more |
|---|---|
| What goes on the door | USDOT 1234567 + your legal or trade name |
| Letter height | Legally must be readable from 50 feet in daylight; we cut 2″ as the safe floor |
| Required on | both sides of the power unit |
Florida trucks that never leave the state need federal-style markings (name + USDOT number) at 26,001 lbs or more — counting GVWR, combined rating, OR actual weight, whichever crosses first. Under 26,001 and no placarded hazmat: exempt. Displaying a false or fraudulent identification number is a first-degree misdemeanor in Florida (316.302(12)).
Source: Fla. Stat. 316.302 · verified 2026-07-24 · general information, not legal advice — confirm with Florida Highway Safety and Motor Vehicles — Commercial Vehicle Enforcement (850) 617-2000.
Check my truck free →Florida DOT decal FAQ
Do I need a USDOT number in Florida?
If you operate a commercial vehicle over 10,001 lbs, haul hazardous materials, or carry passengers for hire, federal law requires a USDOT number displayed on both sides of the vehicle — and many Florida intrastate carriers need one too. We cut yours exactly as it should read.
What size do USDOT decals have to be?
FMCSA’s actual standard is legibility — readable from 50 feet in daylight, in a color that contrasts sharply with your truck, with “USDOT” shown before the number. Two-inch letters are the industry floor that reliably clears that bar, and some states set their own minimum on top of the federal rule. We cut 2″ by default and also cut 3″ and 4″ for larger trucks.
How fast can you ship decals to Florida?
We make every order in 1–2 business days and ship nationwide, so most Florida carriers have their decals in hand within a few days. Everything arrives weeded, taped, and ready to apply.
Can you match Florida's requirements?
Yes. Tell us your state and vehicle at checkout and we cut to your Florida intrastate spec. Not sure what you need? Message us — 20 years in vehicle graphics means we'll get it right.
Not sure exactly what Florida requires?
Answer 7 quick questions and get the exact decal list for your truck — federal and Florida rules checked against the actual regulations, sources cited, sizes included.
Run the free compliance check →Ready to get your Florida trucks compliant?
Cut to spec, shipped fast, and backed by our guarantee: cut right or we remake it free.
Shop all decals →